Warning: Very large door, larger than the surface.

Program Version,EnergyPlus 1.2.1.022, 4/11/2008 11:48 AM,IDD_Version 1.2.1.022
************** Testing Individual Branch Integrity
************* All Branches passed integrity testing
************* Testing Individual Supply Air Path Integrity
************* All Supply Air Paths passed integrity testing
************* Testing Individual Return Air Path Integrity
************* All Return Air Paths passed integrity testing
************* No node connection errors were found.
*************
************* ===== Recurring Surface Error Summary =====
************* The following surface error messages occurred.
*************
************* Base Surface does not surround subsurface errors occuring...
************* Check that the SurfaceGeometry object is expressing the proper starting corner and direction [CounterClockwise/Clockwise]
*************
** Warning ** Base surface does not surround subsurface (CHKSBS), Overlap Status=Partial-Overlap
** ~~~ ** The base surround errors occurred 1 times.
** ~~~ ** Surface "SYS001:ZN001:WALL001" overlaps SubSurface "SYS001:ZN001:WALL001:DOOR001"
*************
** ~~~ ** The base surround errors occurred 1 times (total).
*************
************* EnergyPlus Completed Successfully-- 4 Warning; 0 Severe Errors; Elapsed Time=00hr 00min 2.00sec